EOR

Enhance Oil Recovery (EOR)

Peningkatan perolehan produksi minyak, adalah usaha yang dilakukan untuk mendapatkan produksi minyak dengan cara merubah sifat batuan atau fluida reservoir. Metode ini adalah usaha terakhir yang dilakukan di lapangan minyak biaasa dikenal dengan tertiary recovery, sebelum lapangan ditinggalkan.

Perlu kajian teknis dan ekonomis, untuk menilai proyek EOR ini layak untuk dikerjakan. Jenis-jenis EOR ini sendiri dapat digolongkan menjadi beberapa jenis. Diantaranya :
1. Thermal
- Steam flood : Menginjeksikan uap air ke dalam reservoir, tujuannya adalah untuk menurunkan kekentalan minyak sehingga dapat mengalir. Contoh : Proyek steamflood di Duri, Riau.
2. Electromagnet
menggunakan induksi magnetik untuk menggerakkan minyak
3. Chemical
- ASP (Alkaline-Surfactant-Polymer) : Menginjeksikan bahan kimia/ chemical ke dalam reservoir untuk mendorong minyak

Biaya investasi untuk pengembangan EOR ini relatif tinggi, karena memubutuhkan peralatan dan teknologi yang canggih. Beberapa lapangan minyak di Indonesia sudah mulai memasuki fase ini.

Formation oil reservoir

The crude oil found in oil reservoirs forms in the Earth's crust from the remains of living things. Crude oil is properly known as petroleum, and is a kind of fossil fuel. Scientific evidence indicates that millions of years of heat and pressure changed the remains of microscopic plant and animal remains into crude oil and natural gas.

Roy Nurmi, an interpretation adviser for Schlumberger described the process as follows: "Plankton and algae, proteins and the life that's floating in the sea, as it dies, falls to the bottom, and these organisms are going to be the source of our oil and gas. When they're buried with the accumulating sediment and reach an adequate temperature, something above 50 to 70 °C they start to cook. This transformation, this change, changes them into the liquid hydrocarbons that move and migrate, will become our oil and gas reservoir."^[1]

In addition to the water environment mentioned, which is usually a sea but might also be a river, lake, coral reef or algal mat, the formation of an oil or gas reservoir also requires a sedimentary basin that passes through four steps: burial under miles of sand and mud, pressure cooking, hydrocarbon migration from the source to porous rock, and trapping by impermeable rock. Timing is also an important consideration; it is suggested that the Ohio River Valley could have had as much oil as the Middle East at one time, but that it escaped due to a lack of traps.^[2] The North Sea, on the other hand, endured millions of years of sea level changes that successfully resulted in the formation of more than 150 oilfields.^[3]

Although the process is generally the same, various environmental factors lead to the creation of a wide variety of reservoirs. Reservoirs exist anywhere from 1,000 to 30,000 ft (9,000 m) below the surface and are a variety of shapes, sizes and ages.^[4]